Kenwood PR-A Series User Manual

Hook-up front panel terminals in the parallei operation mode.
Note; I = Ii + I
2
+ Is
The voltage presets on all the
slave machines are set to
maximum, The master operates
in constant voltage mode and
the slaves opeate in constant
current mode.
Figure 6.
For instructions on how to achieve
parallei operation of multiple
machines of different models,
please contuct your dealer or
our distributer.
* Connect ion of Terminal on Rear Panel
While pressing on the slit portion of the terminal with an ordinary (-)
screwdriver, insert the connecting cable into the round juck. When insertion
is complete, remove the screwdriver. The cable wi 11 remain locked into the
terminal even after the screwdriver is removed.
Insert the
connecting cable
13
Slave 1
Slave 2
Load
Push with (—) screwdriver
Figure 7.
Note: When using stranded (twisted) cable, the connector should be attached
by soldering.
00.4-1.0 (AWG26M8)
0. 3-0. 75mm
2
(AWG22—20)

Kenwood PR-A Series Specifications

General

Brand	Kenwood
Model	PR-A Series
Category	Power Supply
Language	English