What to do if I cannot hear other members of my group on my Kenwood ProTalk TK-3301 Transceiver?
If you cannot hear other members of your group, ensure you are using the same frequency and QT/DQT settings. Also, check if other group members are using the Scrambler function and turn on your transceiver’s Scrambler. Finally, make sure you are within range of the other transceivers.
How to turn on Kenwood ProTalk TK-3301 if it doesn't power on?
If your Kenwood Transceiver does not power on, the battery pack may be dead. Try to recharge or replace the battery pack. Also, the battery pack may not be installed correctly. Remove the battery pack and install again.
Why does the battery of my Kenwood Transceiver die quickly after charging?
If the battery power dies shortly after charging, the battery pack life is finished. Replace the battery pack with a new one.
What to do if I hear other voices on the channel of my Kenwood Transceiver?
If you are hearing other voices besides your group members on the channel, change the QT/DQT settings. Make sure all group members change the settings on their transceivers to match the new QT/DQT setting.
General| Brand | Kenwood |
|---|---|
| Model | ProTalk TK-3301 |
| Category | Transceiver |
| Language | English |
To Next Page
