Kenwood TH-D72A Instruction Manual

Kenwood TH-D72A

75 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

INSTRUCTION MANUAL

144/440 MHz FM DUAL BANDER

TH-D72A

144/430 MHz FM DUAL BANDER

TH-D72E

©

Version: 1.00

Table of Contents

Other manuals for Kenwood TH-D72A

Service Manual97 pages

Questions and Answers:

D
Donald LynchAug 27, 2025
How to fix issues when transmitting APRS data on Kenwood Transceiver?
- A
  Anthony RossAug 27, 2025
  You cannot transmit any APRS data. Beacon is OFF. Press [BCON] to switch Beacon ON. The squelch is open. Select the correct squelch level so that the squelch is opened only when signals are present. The data band is inactive. If you have blanked the data band, press [A/B] or [DUAL] to active it. The built-in TNC is OFF. Press [TNC] to switch ON the TNC. You selected Packet mode. Press [TNC] twice so that only “ ” appears.
B
bduncanAug 26, 2025
How to resolve signal interference in full duplex mode on Kenwood TH-D72A?
- M
  marie19Aug 26, 2025
  When transmitting in full duplex mode, another signal is being received at the same time. You are receiving the transmitted signal of your station. Change your settings to a transmit frequency that does not receive the signal, or change the receive frequency. Example frequency setting: Transmit frequency of 146.000 MHz and receive frequency of 439.600 MHz.
E
erica39Aug 25, 2025
How to fix packet operation issues on Kenwood TH-D72A?
- S
  sloanravenAug 26, 2025
  Packet operation results in no connects with other stations. The squelch is open. Select the correct squelch level so that the squelch is opened only when signals are present. You did not select the same transfer rate as the target station. Use HBAUD command to select the appropriate transfer rate.
C
christy51Aug 23, 2025
What to do if nothing appears on the Kenwood TH-D72A display?
- M
  mckinneyjenniferAug 23, 2025
  If nothing appears on the Kenwood Transceiver display, it could be due to several reasons. The battery pack might be discharged, so recharge or replace it. The DC cable or connection could be faulty, in which case, replace the cable. Finally, the power supply fuse may be open (blown), so investigate the cause and replace the fuse.
J
Joyce NelsonSep 13, 2025
Why can't I access the repeater on my Kenwood Transceiver?

Kenwood TH-D72A Specifications

General

Type	Handheld Transceiver
GPS	Yes
APRS	Yes
Display	LCD
Memory Channels	1000
PC Connectivity	USB
Weather Alert	Yes
VOX	Yes
Waterproof	No
Frequency Range	144-148 MHz, 430-450 MHz
Modulation	FM
Power Output	5W
Battery	Li-ion 7.4V 1800mAh

Related product manuals

Preview: Kenwood TH-D74A

Kenwood TH-D74A

Kenwood TH-D7 A

Preview: Kenwood TH-D75A

Kenwood TH-D75A

Preview: Kenwood TH-D75E

Kenwood TH-D75E

Preview: Kenwood TH-D74A/E

Kenwood TH-D74A/E

Preview: Kenwood TH-F6A

Preview: Kenwood TH-75A