Need help?Do you have a question about the Kenwood TH-D74A/E and is the answer not in the manual?
General| Brand | Kenwood |
|---|---|
| Model | TH-D74A/E |
| Category | Transceiver |
| Language | English |
Utilizing the frequency data field in APRS packets for auto-tuning and QSY.
Integrating VoIP systems like D-STAR with APRS for enhanced digital voice communication.
Enhanced display showing target station direction relative to the user's station.
Support for transmitting object and item information with time-stamped data.
Using the QSY feature to disclose audio standby frequencies for communication.
Using QSY feature to disclose D-STAR standby information for automatic configuration.
New QSY feature to restrict 'Tune' operation to a specified distance range.
Explanation of the KISS modem and its role in packet communication protocols.
Definition of KISS (Keep It Simple, Stupid) as a modem with protocol control removed.
Operating an IGate or digipeater station using a PC with APRS software and KISS mode.
Procedure for combining the TH-D74A/E with UI-View32 to form a digipeater.
Step-by-step instructions for linking and operating with D-STAR reflectors.
Procedure to configure the user's own callsign for D-STAR transmission.
Guide to navigating and using the Digital Function Menu for mode selection.
Step-by-step instructions for establishing simplex communication via D-STAR.
Procedure to configure the access repeater for communication.
Manually configuring call back to a calling station in gateway communication.
Using the Direct Reply function for automatic callback transmission.
Steps for configuring the device to connect to a D-STAR reflector node.
Using the Reflector Menu to select and connect to D-STAR reflectors.
Configuring reflector commands within the Destination Select screen.
Utilizing memory channels for simplex node device connections to reflectors.
Procedure for importing repeater list data to the TH-D74A/E via MCP-D74 or microSD.
Step-by-step guide to updating the repeater list using the MCP-D74 software.
Instructions for updating the repeater list using a microSD card.
Adjusting received audio quality using the Audio Equalizer feature.
Detailed guide to the RX Equalizer feature for adjusting audio frequency properties.
Adjusting transmitted audio quality using the TX Equalizer feature.
Guide to the TX Equalizer, allowing adjustment of audio frequency bands for transmission.
Capabilities of the TH-D74A/E for receiving signals across a wide bandwidth and multiple modes.
Default frequency ranges and demodulation modes for bands A and B on the TH-D74A/E.
Explanation of different operating modes (SSB, CW, AM) and their filter configurations.
To Next Page
