EasyManuals Logo

Kenwood TK-190 Pricing And Specification Manual

Kenwood TK-190
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Kenwood USA Corporation July-07
MODEL
DESCRIPTIO
N
LIST
TK-190K
VHF Low Band 29.7 – 37.0 MHz 6W, 16 Channels 642.00
TK-190K2
VHF Low Band 35.0 – 50.0 MHz 6W, 16 Channels
642.00
Important Notice
Regarding the TK-190 Model Radios!
*** If this transceiver is programmed for more than one channel, the transmit
frequencies must be within a 500 kHz range.***
- The physical condition of the antenna may affect the radio's performance.
- If the original KRA-21 antenna is worn, bent or damaged, immediately have your
Kenwood authorized dealer replace the antenna with a new, properly adjusted KRA-21
antenna.
- Failure to follow these instructions may cause poor performance, damage to your
transceiver, and may also place excess transmitter energy on the metal portions of your
radio, which could make the transceiver uncomfortable to handle when transmitting.
- When transmitting, if your hand feels uncomfortable, contact your Kenwood dealer for
a transceiver inspection, and possible antenna replacement.
A
NTENNA
S
KRA-21
1
Tunable VHF Low Band helical antenna 29.7-50MHz. (Note: Antenna band width is 1
MHz.)
40.00
BATTERIES AND CHARGER
S
KNB-17A
1500 mAh, 7.2 VDC (4/5W), NiCd battery
67.00
KNB-17BK
2
Intrinsically Safe Battery 1500 mAH, 7.2 VDC (4/5W), NiCd battery
[Intrinsically Safe Option] - must order L-835.
100.00
KNB-21N
7
1600 mAh NiMH (more than 10 hours life @ 5-5-90) - requires KSC-24 charger. Note:
Not compatible with Kenwood NiCd chargers or earlier model leather cases.
60.00
KNB-22N
7
2100 mAh NiMH (more than 13 hours life @ 5-5-90) - requires KSC-24 charger. Note:
Not compatible with Kenwood NiCd chargers or earlier model leather cases.
70.00
KNB-22NC
7,8
2100 mAh NiMH battery - requires KSC-24 charger - [Intrinsically Safe Option] - must
order L-979.
117.00
KBP-4
3
AA Alkaline Refillable Battery Pack for TK-190/290/390/280/380 (12 AA Alkaline 9V)
Battery cells not incl.
41.00
Land Mobile Radio Division
Price Guide
Heavy-duty Spring-action Belt Clip, Channel Selector Mechanical stop and dressing plate included -
Antenna & Battery not included.
• MIL-STD 810 C/D/E
• Internal Noise-Canceling Microphone
• Operator Selectable Tone/Code (OST)
• Recessed Emergency / Function Key
• Companded Audio
• "Programmable" MIL-SPEC Speak Mics
• 16 Channel Capacity
• Wide-Band Coverage
• 7-Character Invert Display
• Priority Scan
• Programable Power Per Channel
• 5 Programmable Keys
TK-190
Low Band Portable Radio
Page 1 of 4

Other manuals for Kenwood TK-190

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenwood TK-190 and is the answer not in the manual?

Kenwood TK-190 Specifications

General IconGeneral
frequency range29.7 to 37.0MHz (K), 35.0 to 50.0MHz (K2)
number of channelsMax. 16 channels
channel spacing20kHz / 25kHz
PLL step5kHz
operating voltage7.5V DC
Battery Life and Operating Environment IconBattery Life and Operating Environment
battery life9 hours at 6 watts
operating temperature range–30°C to +60°C (–22°F to +140°F)
dimensions with KNB-17A battery58 W x 155 H x 38 D mm
weight with KNB-17A battery600g
Receiver IconReceiver
sensitivity (EIA 12dB SINAD)0.25µV
selectivity70dB
intermodulation65dB
spurious response70dB
audio power output500mW
Transmitter IconTransmitter
RF power output6W / 1W
spurious harmonics55dB/60dB
modulation16KøF3E (Wide)
FM noise45dB
audio distortionLess than 3%

Related product manuals