To Next PageTo Next Page
Need help?Do you have a question about the Kenwood TK-278G and is the answer not in the manual?
General| Brand | Kenwood |
|---|---|
| Model | TK-278G |
| Category | Transceiver |
| Language | English |
Important legal and operational notices for users regarding radio operation.
Awareness of hazards common to transceiver operation, including specific warnings.
Compliance information for Class B digital devices and interference mitigation measures.
Lists and illustrates items included with the transceiver.
Instructions for charging the NiCd battery pack before initial use.
Guide for attaching and detaching the NiCd battery pack.
Steps to screw the antenna onto the transceiver connector securely.
Instructions for attaching the belt clip using supplied screws.
Procedure for attaching the hand strap bracket and strap.
How to install the cover for unused SP/MIC jacks.
Steps to connect and secure an optional speaker/microphone.
Explanation of the rotary encoder's functions for channel selection and squelch adjustment.
Description of the LED indicator's colors and flashing patterns.
How to turn the transceiver ON/OFF and adjust the volume.
Instructions for using the PTT switch to transmit.
Details on the function of the Side 1 programmable key.
Details on the function of the Side 2 programmable key.
Explanation of the programmable function keys o, •, <, and >.
Information about the DTMF keypad for number input.
Location for connecting external speaker/microphone accessories.
Explanation of the icons and indicators displayed on the transceiver screen.
Procedures for turning the transceiver on and off.
How to increase or decrease the audio volume level.
Method for choosing between different communication groups or channels.
Guide to setting the squelch level to filter out background noise.
Steps to initiate a voice transmission to another station.
How to receive incoming transmissions based on channel settings.
How the transceiver monitors a designated priority channel.
Procedure to exclude specific channels from the scanning sequence.
Explanation of the revert channel function during scanning.
Instructions for manually entering DTMF numbers to make calls.
Steps to save DTMF numbers into memory locations.
How to view DTMF numbers stored in memory.
Method to call numbers stored in memory.
Procedure to delete DTMF numbers from memory.
How to redial the last transmitted number.
How the transceiver behaves when receiving a signal with the correct Code Squelch.
Steps for transmitting using the Code Squelch feature.
How the transceiver behaves when receiving a Selective Call.
Steps for transmitting using the Selective Call feature.
How the transceiver behaves when receiving a 2-Tone signal.
Steps for transmitting using the 2-Tone Signalling feature.
How to switch between high and low transmit power levels.
Explanation of the timer that limits continuous transmission duration.
Prevents transmission on an already active channel.
Allows direct communication without a repeater.
Swaps transmit and receive frequencies for communication.
Monitors battery status and warns of low voltage.
Controls the display backlight ON/OFF function.
Allows listening to background noise or disabling signalling.
Signals used to access and release repeaters or phone systems.
