To Next PageTo Next Page
Need help?Do you have a question about the Kenwood TK-3180 and is the answer not in the manual?
General| Frequency Range | 400-470 MHz |
|---|---|
| Channel Capacity | 128 |
| Power Output | 5W |
| Channel Spacing | 12.5/25 kHz |
| IP Rating | IP54 |
| Type | Portable |
| Weight | 280 g |
| Battery | Li-ion |
| Operating Temperature | -30°C to +60°C |
| Operating Voltage | 7.5 V |
Details the TK-2180 model as a VHF FM Transceiver.
Details the TK-3180 model as a UHF FM Transceiver.
Safety and legal notices regarding transceiver operation, including penalties for illegal use.
Safety guidelines for operating the transceiver, including charging, usage, and physical handling.
Situations requiring the transceiver to be turned off due to potential hazards like explosive atmospheres or proximity to fuel.
Lists the items included in the transceiver package, such as belt clips and screws.
Important safety guidelines and warnings related to the charging and handling of battery packs.
Critical warnings about disassembling, short-circuiting, incinerating, or immersing Li-ion battery packs.
Step-by-step instructions for attaching and securing the battery pack to the transceiver.
Identifies key controls like antenna connector, selector, power switch, PTT, side keys, and DTMF keypad.
Describes how zone and channel numbers are displayed, including custom names and operator tones.
Lists various functions that can be assigned to keys and the selector for customizable operation.
Instructions for switching the transceiver's power supply on and off using the power control.
Steps for pressing the PTT switch and speaking into the microphone to transmit.
How the transceiver automatically searches for and receives signals in different zone types.
How to start scanning conventional zones or channels using the programmed Scan key.
How QT/DQT signaling filters calls based on sub-audible tones or codes for private communication.
Steps to select a station ID and initiate a voice call to a specific transceiver.
Steps for initiating a voice call to a station or group using FleetSync Selcall.
Explanation of the 3-digit Fleet number and 4-digit ID number combination for calls.
Methods for dialing DTMF numbers using the front panel keypad and PTT switch.
How DTMF signaling filters calls based on programmed codes for secure communication.
Steps to set the VOX Gain level for hands-free transmission using a headset.
How to initiate an emergency call by pressing and holding the Emergency key.
How to switch between high and low transmit power for channels programmed for high power.
How to use the Monitor/Squelch Off key to listen to weak signals or background noise.
How to lock the transceiver keys to prevent accidental operation and how to unlock them.
How the scrambler distorts voice for limited privacy and requires matching settings on other transceivers.
Explains the TOT function to prevent prolonged channel usage and its programmable time limits.
How the voice recorder allows recording conversations and creating voice memos.
How to set the transceiver to automatically respond to individual calls using FleetSync.
How to play back recorded conversations, memos, or messages, including navigation controls.
