Need help?Do you have a question about the Kenwood TK-3317 and is the answer not in the manual?
General| Brand | Kenwood |
|---|---|
| Model | TK-3317 |
| Category | Transceiver |
| Language | English |
Copyright notice for embedded firmware in Kenwood products.
Lists all accessories included with the transceiver.
Instructions for attaching and detaching the battery pack.
How to screw the antenna onto the transceiver.
Guidance on attaching the belt clip using screws.
Instructions for covering the jacks when not in use.
How to connect a speaker/microphone or headset.
Steps for charging the transceiver's battery pack using the charger.
How to turn the transceiver on and off.
Procedure for entering a password to unlock the transceiver.
How to control the audio volume level.
How to choose the desired operating zone and channel.
Steps for sending a transmission using the PTT switch.
How to receive calls and adjust volume.
How the transceiver automatically switches to a priority channel.
Temporarily removing channels from the scan sequence.
Adding or removing channels/zones from the scan list.
Defines the channel used after a scan.
Sending DTMF codes manually via the keypad.
Using pre-programmed numbers for quick dialing.
Configuring DTMF digit display during entry.
Disabling the transceiver if it is stolen or lost.
How DTMF codes are displayed on the screen.
Overview of additional signaling types like 2-tone and DTMF.
How 2-tone signaling opens the squelch.
How DTMF signaling opens the squelch.
Reference to Selcall for FleetSync signaling.
MDC-1200 signaling using AFSK.
Changing encode and decode tones for channels.
Alphanumeric 2-way Paging Function protocol.
Making voice calls to specific stations or groups.
Structure of Fleet and ID codes for calls.
Transmitting pre-programmed status messages.
Accessing and managing stored call IDs and messages.
Storing Caller IDs from FleetSync Selcalls.
Receiving and storing short data messages.
Transmitting location data using a GPS microphone.
How to use the hands-free transmission feature.
Adjusting sensitivity for VOX transmission.
Changing between high and low transmit power settings.
Selecting a channel by directly entering its number.
Alerting party members when making a call.
Locking or unlocking transceiver keys to prevent accidental changes.
Sending positioning data to a base station.
How to make an emergency call.
Safety feature that triggers emergency operation if no activity is detected.
Direct communication without a repeater.
Encrypting voice for private conversations.
Listening to weak signals or background noise.
Adjusting the squelch threshold.
Turning on the display and keypad backlight.
Quickly selecting the lowest channel of the lowest zone.
Prevents prolonged transmissions on a channel.
Reduces power consumption when idle.
Displays the remaining battery charge level.
Shows the strength of received signals.
Prevents transmission on an occupied channel.
Improves signal clarity by reducing noise.
Sending a unique ID code with transmissions.
To Next Page
