Need help?Do you have a question about the Kenwood TK-8102H and is the answer not in the manual?
Frequency| frequency range K,M | 450 to 490MHz |
|---|---|
| frequency range K2 | 485 to 512MHz |
| frequency range K3 | 400 to 430MHz |
Channels| number of channels | 4 channels |
|---|---|
| channel spacing wide | 25kHz |
| channel spacing narrow | 12.5kHz |
Power and Voltage| operating voltage | 13.6V DC ± 15% |
|---|---|
| current drain on standby | Less than 0.4A |
| current drain on receive | Less than 1.0A |
| current drain on transmit | Less than 14.0A |
Operating Environment| operating temperature range | –30°C to +60°C |
|---|---|
| frequency stability | ± 2.5ppm |
Receiver Specifications| sensitivity 12dB SINAD wide | 0.28µV |
|---|---|
| sensitivity 12dB SINAD narrow | 0.35µV |
| selectivity wide | 75dB |
| selectivity narrow | 65dB |
| intermodulation wide | 70dB |
| intermodulation narrow | 60dB |
| spurious response | 75dB |
| audio power output | 4.0W |
Transmitter Specifications| RF power output high | 45W |
|---|---|
| RF power output low | 25W |
| spurious and harmonics | 70dB |
| modulation wide | 16K0F3E |
| modulation narrow | 11K0F3E |
| FM noise wide | 45dB |
| FM noise narrow | 40dB |
| audio distortion | Less than 3% |
Weight and Dimensions| dimensions | 6.30 (160) W x 1.70 (43) H x 5.40 (137) D inch (mm) |
|---|---|
| weight | 2.60 lbs (1.18kg) |
Lists necessary tools for transceiver installation.
Details connecting the DC power cable to the vehicle battery.
Covers switching power, adjusting volume, and selecting channels.
Details how to transmit and receive signals.
Manages saving, dialing, and clearing DTMF numbers.
Procedure for entering and operating in emergency mode.
To Next Page
