Need help?Do you have a question about the Kenwood TK-8102H and is the answer not in the manual?
Frequency| frequency range K,M | 450 to 490MHz |
|---|---|
| frequency range K2 | 485 to 512MHz |
| frequency range K3 | 400 to 430MHz |
Channels| number of channels | 4 channels |
|---|---|
| channel spacing wide | 25kHz |
| channel spacing narrow | 12.5kHz |
Power and Voltage| operating voltage | 13.6V DC ± 15% |
|---|---|
| current drain on standby | Less than 0.4A |
| current drain on receive | Less than 1.0A |
| current drain on transmit | Less than 14.0A |
Operating Environment| operating temperature range | –30°C to +60°C |
|---|---|
| frequency stability | ± 2.5ppm |
Receiver Specifications| sensitivity 12dB SINAD wide | 0.28µV |
|---|---|
| sensitivity 12dB SINAD narrow | 0.35µV |
| selectivity wide | 75dB |
| selectivity narrow | 65dB |
| intermodulation wide | 70dB |
| intermodulation narrow | 60dB |
| spurious response | 75dB |
| audio power output | 4.0W |
Transmitter Specifications| RF power output high | 45W |
|---|---|
| RF power output low | 25W |
| spurious and harmonics | 70dB |
| modulation wide | 16K0F3E |
| modulation narrow | 11K0F3E |
| FM noise wide | 45dB |
| FM noise narrow | 40dB |
| audio distortion | Less than 3% |
Weight and Dimensions| dimensions | 6.30 (160) W x 1.70 (43) H x 5.40 (137) D inch (mm) |
|---|---|
| weight | 2.60 lbs (1.18kg) |
To Next Page
