Kenwood TS-590SG Service Manual

SERVICE MANUAL
This product complies with the
RoHS
directive for the European market.
ThisproductusesLeadFreesolder.
© 2014-12 PRINTED IN JA PAN
RQ045 (K) B5B-7163-00
HF / 50MHz TRANSCEIVER
TS-590SG
Key top (8key)
（
K2K-0121-00)
Panel
(A6C-0009-00)
Phone jack (9P)
(E11-0705-15)
RF coaxial receptacle (Round)
(E06-0858-25)
Key top (25key)
(K2K-0122-00)
RF coaxial receptacle (M)
(E04-0167-15)x2
3.5D phone
jack (3P)
(E11-0414-15)
Rectangular receptacle
(E58-0537-05)
Sub socket (D)
(E58-0529-05)
3.5D phone jack (3P)
(E11-0455-05)
Pin jack
(E13-0166-25)x2
Foot (Back)
(J02-0475-15)x2
Phone jack (9P)
(E11-0705-15)
DIN socket
(E56-0408-15)
DIN socket
(E06-0752-15)
Lead wire with connector (EXT.AT)
(E37-0891-25)
Lead wire with terminal
(E37-1480-05)
Foot (Front)
(J02-0442-04)x2
Foot (Front)
(J02-0440-14)
Knob (Main knob)
(K2B-0001-00)
Key top (20key)
(K2K-0123-00)
Key top (5key)
(K2K-0124-00)
Front glass
(B1A-0022-00)
Knob (RIT/XIT)
(K29-9471-03)
Knob (MULTI/CH, PF-C
）
(K29-9456-23)
Knob (Inside/NOTCH,AF)
(K29-9390-03)x2
Knob (Outside/SQL,RF)
(K29-9596-03)x2
Knob (Inside/HI)
(K29-9477-03)
Knob (Outside/LO)
(K2K-0125-00)

Kenwood TS-590SG Specifications

General

Display	LCD
Antenna Impedance	50 ohms
Power Supply Requirement	13.8 V DC ±15%
Modes	SSB, CW, AM
RF Output Power	100 W (HF)
Receiver Type	Superheterodyne
Receiver Selectivity	2.4 kHz (SSB), 500 Hz (CW)
IF Rejection	70 dB or better
Image Rejection	>70 dB
Audio Output Power	2 W (8 ohms)
Dimensions	270 x 96 x 291 mm
Weight	7.4 kg
Current Consumption	TX: 20.5 A