EasyManua.ls Logo

Kenwood UBZ-AL14 User Manual

Kenwood UBZ-AL14
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Kenwood UBZ-AL14 and is the answer not in the manual?

Kenwood UBZ-AL14 Specifications

General IconGeneral
TypeTwo-Way Radio
Channels16
Power Output0.5W
WaterproofIP54
Battery LifeUp to 20 hours (with alkaline batteries)
BatteryLi-ion

Summary

Thank You

Precautions

General Features

Control Diagram

Installing and Removing Battery

Operation

Power On/Off

Press and hold the POWER key for a half second to power on or off the transceiver.

Reception

Adjust volume using UP/Down keys. Speaker sounds on correct signal reception.

Transmission

Press PTT key to transmit. Speak clearly 2-3 inches from mic. TX icon appears on LCD.

Call Function

Press CALL key to transmit an audible Call Tone for 2 seconds.

Channel Selection

Blink channel digits using MODE key, adjust with UP/DOWN, confirm with MODE/PTT/CALL.

Lamp Control

Press LAMP key to illuminate the LCD. Lamp goes out after 5 seconds.

Battery Saver

Automatically activates after 3 seconds of inactivity to conserve battery life.

Frequency Chart

Related product manuals