Kenwood VR-507 Instruction Manual

KENWOOD
AUDIO VIDEO SURROUND RECEIVER
VR-507
KRFW7050D
INSTRUCTION MANUAL
KENWOOD CORPORATlON
This mstrudion manual IS used to describe multiple models listed above.
Model availability and features (functions) may differ depending on the country and
sales area.
About the supplied rem&e control
Compared to standard remote controls, the remote control supplied with this receiver has several operation
modes. These modes enable the remote control to control other audio/video components. In order to
effectively use the remote control it IS Important to read the operating instructions and obtain a proper
understanding of the remote control and how to switch its operation modes (etc.).
Using the remote control without completely understanding its design and how to switch the operation modes
may result in Incorrect operations.
B60-5027-00 00 a (K, P, Y, M, X, I) r%-; 0009

Kenwood VR-507 Specifications

General

Channels	5.1
Tuning range	AM/FM
Total Harmonic Distortion	0.7%
Input Impedance	47 kOhms
Digital inputs	2 Optical, 1 Coaxial
Video Connections	Composite
Signal to noise ratio	95 dB (Line)
Surround output	Dolby Digital, DTS
Frequency Response	10Hz - 100kHz
Input Sensitivity	200mV
Speaker load impedance	6 ohms
Power Output (6 ohms)	100W per channel
Frequency Response (extended)	10 Hz to 100 kHz (+0, -3 dB)
Speaker Impedance	6 ohms
Dimensions (mm)	440 x 158 x 418 mm