To Next PageTo Next Page
Need help?Do you have a question about the Kenwood VR-9070 and is the answer not in the manual?
Audio Specifications| Rated power output during stereo operation | 100 watts per channel |
|---|---|
| Effective power output during surround operation (Front) | 100 W + 100 W |
| Effective power output during surround operation (Center) | 100 W |
| Effective power output during surround operation (Surround) | 100 W + 100 W |
| Effective power output during surround operation (Surround Back) | 100 W + 100 W |
| Total harmonic distortion | 0.009 % |
| Frequency response (CD/DVD) | 10 Hz ~ 100 kHz, +0 dB ~ –3.0 dB |
| Frequency response (PHONO ‘RIAA’ response) | 40 Hz ~ 20 kHz, +1.5 dB ~ –3.0 dB |
| Maximum input level (PHONO MM) | 40 mV, 1 % T.H.D., at 1 kHz |
| Signal to noise ratio (PHONO MM) | 75 dB |
| Signal to noise ratio (CD/DVD) | 95 dB |
| Input sensitivity / impedance (PHONO MM) | 4 mV / 47 kΩ |
| Output level / impedance (TAPE REC) | 300 mV / 1 kΩ |
| Output level / impedance (PRE OUT FRONT CHANNEL) | 1 V / 500 Ω |
| Output level / impedance (PRE OUT CENTER CHANNEL) | 1 V / 500 Ω |
| Output level / impedance (PRE OUT SURROUND CHANNEL) | 1 V / 500 Ω |
| Output level / impedance (PRE OUT SURROUND BACK CHANNEL) | 1 V / 500 Ω |
| Output level / impedance (PRE OUT SUBWOOFER) | 1 V / 500 Ω |
| Tone control (Bass) | ±10 dB (at 100 Hz) |
| Tone control (Treble) | ±10 dB (at 10 kHz) |
| Loudness control (Volume at –30 dB level) | +6 dB (100 Hz) |
Digital Audio Specifications| Sampling frequency | 32 kHz, 44.1 kHz, 48 kHz, 96 kHz |
|---|---|
| Input level / impedance / wavelength (Optical) | –15 dBm ~ –24 dBm, 660 nm ±30 nm |
| Input level / impedance (Coaxial) | 0.5 Vp-p / 75 Ω |
| Output level / impedance / wavelength (Optical) | –21 dBm ~ –15 dBm, 660 nm ±30 nm |
Video Specifications| VIDEO inputs / outputs (Composite) | 1 Vp-p / 75 Ω |
|---|---|
| S VIDEO inputs / outputs (Luminance signal) | 1 Vp-p / 75 Ω |
| S VIDEO inputs / outputs (Chrominance signal) | 0.286 Vp-p / 75 Ω |
| COMPONENT VIDEO inputs / outputs (Luminance signal) | 1 Vp-p / 75 Ω |
| COMPONENT VIDEO inputs / outputs (CB/CR-signal) | 0.64 Vp-p / 75 Ω |
FM Tuner Specifications| Tuning frequency range | 87.5 MHz ~ 108.0 MHz |
|---|---|
| Usable sensitivity (MONO) | 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz dev, SINAD 30 dB) |
| 50 dB quieting sensitivity (STEREO) | 28 µV (75 Ω)/ 40.2 dBf (75 kHz dev) |
| Total harmonic distortion (MONO) | 0.5% (65 dBf input) |
| Total harmonic distortion (STEREO) | 0.7% (65 dBf input) |
| Signal to noise ratio (MONO) | 75 dB (65 dBf input) |
| Signal to noise ratio (STEREO) | 68 dB (65 dBf input) |
| Stereo separation (1 kHz) | 40 dB |
| Selectivity (±400 kHz) | 70 dB |
| Frequency response (30 Hz ~ 15 kHz) | +0.5 dB, –3.0 dB |
AM Tuner Specifications| Tuning frequency range | 530 kHz ~ 1, 700 kHz |
|---|---|
| Usable sensitivity (30% mod, S/N 20 dB) | 16 µV / (600 µV/m) |
| Signal to noise ratio (30% mod, 400 Hz) | 50 dB (60 dBµV EMF input) |
General Specifications| Power consumption | 3.4 A |
|---|---|
| Standby power consumption | less than 1 W |
| AC outlet switched | total 150 W, 1.25 A max. |
| Dimensions (W) | 440 mm (17-5/16") |
| Dimensions (H) | 166 mm (6-9/16") |
| Dimensions (D) | 396 mm (15-9/16") |
| Weight (Net) | 12 kg (26.5 lb) |
Warnings and cautions for safe operation, fire and electric shock prevention.
Selects input modes (FULL AUTO, DIGITAL MANUAL, 6CH INPUT, ANALOG) for digital audio.
Instructions for connecting speaker wires and banana plugs to terminals.
Guidance on positioning front, surround, center, and subwoofer speakers for optimal sound.
Illustrates connecting a DVD player with digital and component video connections.
Shows how to connect components like CD players, MD recorders, and record players.
Details connections for video components using S-Video and composite video jacks.
Explains connecting digital audio sources via optical or coaxial cables.
Illustrates connecting video components using Y, Cb, Cr jacks for better picture quality.
Instructions for connecting various speaker types to the receiver.
Details connecting PRE OUT jacks to external power amplifiers.
Initial configuration of speaker system settings.
Adjusting crossover frequency based on speaker characteristics for natural sound.
Adjusting speaker volume levels using test tones for balanced sound.
Restricts low frequency to prevent clipping, especially with subwoofer off.
Adjusts the volume level for low-frequency effects sent to the subwoofer.
Measures and inputs speaker distances for accurate surround sound processing.
Steps to store up to 40 radio stations into memory for quick recall.
Explains different surround sound modes (5.1, 6.1, 7.1 channel) and speaker placements.
Covers THX, THX Select, and THX Surround EX modes for cinema sound.
How to select listening modes for DTS, Dolby Digital, and Pro Logic sources.
Activates THX modes and temporarily switches to STEREO listening mode.
Programming setup codes to control other audio/video components.
Instructions for storing remote control codes for other devices onto the remote.
Procedure to reset the microcomputer to its normal operating condition.
