470-BA-defs-0017
59
14 TROUBLE SHOOTING
Trouble Possible causes
No indication - Balance is not turned on
- Mains connection does not function (cable not connected,
cable defective).
- Mains supply break down.
Weight indication is
changing permanently
- Air movements.
- Vibrations of the table or the floor
- The pan is in contact with an alien element.
Weighing result is obviously
false
- Balance has not been tared.
- No adjusting has been done.
- Temperature deviations.
14.1 Error messages
O-Err
The balance has been overloaded.
b-Err
Electronic error, caused by electrostatic fields. Check the
environment. When necessary change the installation place.
1-Err
Wrong adjusting weight (too light).
2-Err
Wrong adjusting weight (to heavy).
11-Err
Transport lock not released, see point 3 “Installation“. Weighing
mechanism defective. Please contact the manufacturer.
When other error messages appear turn off the balance and on again. When the error
message still appears please contact the manufacturer.
To Previous Page
Loading...
