770/GS/GJ-BA-defsi-0023 133
Additional
ISO/GLP-compliant
Utilities
functions
Printout or Record
Data output Code Menu access Code
The adjusting operations and
without stability 6 1 1 accessible 8 1 1 measured values are automati-
after stability 6 1 2* menu-setting-dep. 8 1 2* cally output, over the data inter-
at stability 6 1 3 face, in a document that records
automatic without stability 6 1 4
Key functions Code
the time, date, serial number and
automatic at stability 6 1 5 accessible 8 3 1 model number.
blocked 8 3 2* (additional code 7 2 2).
Auto print Code
Code
stoppable by
PRINT
key
6 2 1
Universal switch Code
off 8 10 1*
not stoppable 6 2 2*
PRINT
8 4 1* on 8 10 3
TARE
8 4 2
Data output after Code
Calibr./Lin.
CAL
8 4 3
Reset funciton
1 display update 6 3 1*
F
key
8 4 4 The reset function enables to
2 display updates 6 3 2
CF
key
8 4 5 reset all codes to the factory
settings indicated by an „*“.
Application parameters Code Power-on mode Code
off 7 1 1* off-on-standby 8 5 1*
Reference value and weight 7 1 2 on-standby 8 5 3
Menu code settings Code
Autom. power-on 8 5 4 Menu reset 9 -- 1
Data ID codes Code
off 9 -- 2
without 7 2 1*
with 7 2 2
Data output of tare Code
* = factory setting, partly
Last net value 7 3 1* depends on balance
Tare memory data 7 3 2 model
To Previous Page
Loading...
Need help?
General
