KERN ALS Series User Manual

38 TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2011
8.4 Adjustment using the external weight
• Factory setting in ALS/PLS models
• In ALJ/PLJ models it is available only in the verifiable setting.
•
Preliminary condition: Menu setting “External adjustment”, see
chapter 8.1.
• The weight of the recommended adjustment weight, see chapter 1
“Technical Specification”.
• Information on reference weights can be found on the Internet at
http://www.kern-sohn.com.

Ensure there are no objects on the scale plate. In the weighing mode, press the
CAL button.


Wait until the blinking weight value of the required adjustment weight is
displayed.
 During
blinking, place the required adjustment weight carefully in the middle of
the scale plate. The blinking symbol will disappear.
 After the successful adjustment, the scale will switch to the weighing mode again
automatically.
 Remove the adjustment weight.
,

KERN ALS Series Specifications

General

Brand	KERN
Model	ALS Series
Category	Scales
Language	English