KERN ALS Series - Page 76

76 TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2011
 Using the navigation buttons , select the required multiplication factor.
1 = Single formulation amount
2 = Double formulation amount
3 = Triple formulation amount
etc.
 Confirm the selected multiplication factor, pressing the PRINT button.
Example for the factor 1:
1 Tolerance value
2 Total weight of all ingredients
3 Preset ingredient value
4 Total weight of all ingredients
5 Tolerance index
Tolerance index overview:
Example: Tolerance from –10.0% to +5.0%
Weighing value below the preset
value
Weighing value = preset value
Weighing value above the preset
value
Example: Without entering the tolerance value:
Weighing value below the preset
value
Weighing value = preset value
Weighing value above the preset
value