KERN CDS Series Operating Instruction

CKE-BA-e-2132 29
 Place the adjustment weight and confirm, pressing TARE. The <wait> and
<finish> symbols will be displayed consecutively.
After the successful adjustment, the scales will switch to the weighing mode again
automatically.
If an adjustment error occurs (e.g. there are any items on the scales plate), the dis-
play will show <wrong>. Switch the scales off and repeat the adjustment process.
11.2.4 Taking over the placed weight as the PRE-TARE value <Ptare actuel>
 Place the scales vessel.
 Display the <Ptare> menu item and confirm, pressing TARE.
 To take over the weight of the placed weight as the PRE-TARE value, choose
the <actuel> option, using navigation buttons .
 Confirm, pressing TARE. The <wait> symbol will be displayed.
 The scales vessel weight will be saved as tara.
 Remove the scales vessel, the following will be displayed: (TARE) symbol and
tara weight with a negative symbol.
 Place a filled scales vessel.
 Wait until the stabilization indicator is displayed ( ).
 Read out the net weight.
The entered tara value will be used until you enter a
new one. To delete it,
press TARE or confirm the menu item <clear>, pressing TARE.

KERN CDS Series Specifications

General

Brand	KERN
Model	CDS Series
Category	Scales
Language	English