DE-BA-defsi-0640
63
8.4 Selection of the adjustment weight
In the model series KERN DE, the adjustment weight can be selected from three pre-
set nominal values (approx.1/3; 2/3; max) (refer also to table 1 below, factory setting
with grey background). In order to achieve high-quality weighing results in the sense
of the measuring technology, it is recommended to select the nominal value as high
as possible.
Table 1:
DE3K1N DE6K0.5N DE6K2N DE12K1N DE15K0.5N
1000 2000 2000 4000 5000
2000 4000 4000 8000 10000
3000 6000 6000 12000 15000
DE15K5N DE24K2N DE30K1N DE36K10N DE36K10NL
5000 10000
10000
10000 10000
10000 15000
20000
20000 20000
15000 20000
30000
30000 30000
DE60K2N DE60K5N DE60K5NL DE60K20N DE60K20NL
20000 20000 20000 20000 20000
40000 40000 40000 40000 40000
60000 60000 60000 60000 60000
DE120K10N DE120K10NL DE150K5N DE150K50N DE150K50NL
40000 40000 50000 50000 50000
80000 80000 100000 100000 100000
120000 120000 150000 150000 150000
DE150K50NXL DE240K20NL DE300K100N DE300K100NL
50000 100000
100000
100000
100000 150000
200000
200000
150000 200000
300000
300000