KERN EOC 30K-4S - Page 65

EOC-BA-e-1920 11
KERN
EOC 300K-2
EOC 300K-2L
EOC 300K-3
Readability (d) 50 g / 100 g 50 g / 100 g 5 g / 10 g
Weighing range (max)
150 kg / 300 kg 150 kg / 300 kg 150 kg / 300 kg
Reproducibility 50 g / 100 g 50 g / 100 g 5 g / 10 g
Linearity ± 150 / 300 g ± 150 / 300 g ± 15 g / 30 g
Warm-up time 10 minutes 10 minutes 2 hours
Minimum unit weight at
piece counting under
laboratory conditions*
10 g 10 g 10 g
Minimum unit weight at
piece counting under
normal conditions**
100 g 100 g 100 g
Reference unit weights at
piece count
10, 20, 50, 100, 200
Weighing Units Details
„Weighing units“
chapter 7.6
Recommended
adjustment weight, not
added (class)
Details for „Selection of
the Adjustment weight“
in chapter 7.6
300 kg
(M1)
300 kg
(M1)
300 kg
(F2)
Stabilization time (typical) 2 sec. 2 sec. 2 sec.
Electric Supply 100 V - 240 V, 50 / 60 Hz
Auto Off
off, 3 min., 5 min., 15 min., 30 min.
Operating temperature - 10° C .... + 40° C
Humidity of air max. 80 % (not condensing)
Terminal (B x D x H) mm 268 x 115 x 80
Platform (B x D x H )mm
500 x 400 x 120 600 x 500 x 150 mm 500 x 400 x 120
Weight kg (net) 9.0 18.4 9.0
* Minimum unit weight at piece counting under laboratory conditions:
 Perfect ambient conditions to perform high resolution counting

No dispersion of counted parts weight
**Minimum unit weight at piece counting under normal conditions:
 Unstable ambient conditions (wind gusts, vibrations)
 Dispersion of counted parts weight