KERN EOC 6K-3 - Weighing with Tare

28 EOC-BA-e-1711
Switch-over weighing unit:
Keep pressed, the display changes over to the
weighing units activated before (e.g. kg  lb)

(example)
7.7 Weighing with tare
Deposit weighing vessel. After successful standstill
control press the button. Zero display and indicator
„NET“ will appear.
The weight of the container is now internally saved.
Weigh the load, the net weight will be indicated.
The weight of the weighing container will be displayed as
a minus number after removing the load and the weighing
container.
The tare procedure can be repeated as many times as
necessary, for example with initial weighing of several
components for a mix (add-on weighing). The limit is
reached when the taring range capacity (see type plate)is
full.
To change between gross weight and net weight, press
.
To delete the tare value, remove load from weighing plate
and press .