EN
33
Adjusting procedures:
• Turn the feet clockwise to raise the refrigerator.
• Turn the feet counterclockwise to lower the refrigerator.
• Adjust the right and left feet based on the procedures above to a horizontal level.
(The picture above is only for reference. The actual configuration will depend on the physical product
or statement by the distributor)
When the fridge door is low:
Open the door, use a wrench to loosen the locking nut and to rotate the adjusting nut anti-clockwise to raise
the height of the door. Once the doors are aligned, then tighten the locking nut by rotating it anti-clockwise.
When the fridge door is high:
Open the door, use a wre n eh to rotate the adjusting nut clockwise to I ower the height of the door. On ce the
doors are aligned, then tighten the locking nutby rotating it anti-clockwise.
LEVELLING DOOR
Precautions before operation:
Before operation of accessories, it shall be ensured thai the refrigerator is disconnected from power.
Before adjusting the door , precautions shall be taken to prevent any personal injury.
Schematic diagram of levelling the door body:
List of tools to be provided by the user:
• Wrench M10
To Next Page
Loading...
Need help?
General
