EasyManua.ls Logo

Kernel KN-5000C - Operation Procedures; Preparation Before Treatment

Kernel KN-5000C
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
If the light source is turned on for a long time, the inside of the
treatment handle will generate more heat. So please turn off the
power switch after the handle cools down completely.
Notes: When the equipment is turned on, placed or turned off, the
irradiation is not activated and the treatment handle will not
emit the UV irradiation.
4.1.3 Treatment instructions
Summary
Phototherapy is an effective therapy. The operating doctor should have
certain knowledge and experience in phototherapy. It is absolutely not
allowed to take the treatment process as a learning process. The
treatment process should be carried out under the guidance of a doctor,
and the attending doctor should carry out regular follow-up monitoring.
Hood of the treatment handle
A hood should be installed at the front end of the handle before use. The
hood needs to be disinfected before use.
UV protective goggles

Related product manuals