47
➢ Manual test
In the manual test, the doctor can set the six output doses manually.
Set the “CHOOSE SKIN TYPE” to “Manual”, click the “Dose” box,
the keyboard will be showed, and enter the dose value. The input range is
from 80mJ/cm
2
to 600mJ/cm
2
.
The test method is the same as "automatic test". After the MED test is
completed, press the " " button to return to the main interface.
4.3.2 Treatment
Defining the therapeutic range for skin lesions:
During the treatment, the doctor needs to know which lesion has
been treated with radiation. Repeated exposure is absolutely not
allowed on one site, otherwise it will lead to excessive exposure.
Therefore, doctors are advised to mark the skin. If the treated area has
both lesions and normal skin, it is recommended to cover the normal
skin.
To Next Page
Loading...
