Kernel KN-5000C - EMC Emission Declaration; Electromagnetic Emission Guidance

89
Guidance and manufacturer’s declaration - electromagnetic
emission - for all equipment and systems
1
Guidance and manufacturer’s declaration – electromagnetic emission
2
308nm Excimer System is intended for use in the electromagnetic
environment specified below. The customer or the user of 308nm Excimer
System should assure that it is used in such an environment.
3
Emissions test
Complianc
e
Electromagnetic environment - guidance
4
RF emissions
EN 55011
Group 1
308nm Excimer System uses RF energy
only for its internal function. Therefore,
its RF emissions are very low and are not
likely to cause any interference in nearby
electronic equipment.
5
RF emissions
EN 55011
Class A
308nm Excimer System is suitable for use
in all establishments, including domestic
establishments and those directly
connected to the public low-voltage
power supply network that supplies
6
Harmonic emissions
EN 61000-3-2
Class A
7
Voltage fluctuations
Complies