EasyManua.ls Logo

KERR KD Gemini - 2.5 Shutting Furnace Down; 2.6 Restarting Furnace

Default Icon
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
KD GEMINI INSTALLATION/OPERATION MANUAL
KD Gemini May-06
3
2.5 SHUTTING FURNACE DOWN
POWER OFF Turn off main power switch.
FUEL OFF Shut off manual fuel supply valve.
Always keep manual fuel supply valve shut off if the burner is shut down for an
extended period of time.
2.6 RESTARTING FURNACE
Follow this procedure before restarting a unit that has been shut down for an extended
period of time.
INSPECTION Have the furnace/system serviced and inspected by a qualified
technician.
CHECK Furnace/system has not been tampered with.
FUEL ON & Turn on fuel supply and check that there are no leaks.
CHECK
POWER ON Turn on power switch and check that the furnace starts and operates
& CHECK as usual.
CHECK If the furnace/system fails to operate or operates in an unusual
manner, call your service technician.
OPERATION If the burner fails to operate at any time, call a qualified burner
technician.

Related product manuals