EN-UK
4 Technical data
Control unit
Maximum power (kW) at the switch output (if cos φ = 1) 1.8 kW
Nominal current range 3 - 8 A
Weight 0.5 kg
Dimensions (LxWxD), mm 140x150x75
Operating voltage 230V / 50Hz
Standby power 2.5 W
Potential-free contact max. 42 V DC / 0.5 A
Battery specification 1x 9V 6LR61
Working temperature 0 - 40°C
Protection rating IP 54
Protection class I
Required fuse protection C16 A single pole
Residual current device (RCD) required 30 mA
Connection type Schuko earthed safety plug
Pump
Information\pump type SPF 1300
Weight 10 kg
Power P1/P2 1500W/910W
Speed 2600 rpm
Operating voltage 230V; 50Hz
Rated current 6.4A
max. pumping capacity 32 m
3
/h
max. pumping height 9.2m
max. temperature (perma-
nent) of pumped material
35°
Protection rating IP68 (3m)
Protection class I
Operating mode S3 - 15%
Fig. 1: Pumping capacity and height
4.1 Dimensions, volume
Pumping volume [l] approx. 20
Tank volume [l] approx. 50
26 / 112 Lifting station/Installation and operating instructions 010-974
To Next Page
Loading...
