Need help?Do you have a question about the Kessel Comfort PLUS and is the answer not in the manual?
General| Brand | Kessel |
|---|---|
| Model | Comfort PLUS |
| Category | Control Unit |
| Language | English |
Defines the required personnel qualifications and responsibilities for operating KESSEL systems safely.
Provides essential safety guidelines for system operation and maintenance, emphasizing isolation and qualified personnel.
Instructions for safely handling electrostatic components to prevent damage and ensure proper grounding.
Guidelines for using ATEX-compliant systems and components in potentially explosive atmospheres.
Specifies the intended application of the Comfort PLUS control unit for wastewater lifting and pumping stations.
Describes the control unit's function for automatic pumping and lifting station control, available in different power ratings.
Provides detailed technical specifications and requirements related to ATEX design for the control unit.
Step-by-step instructions for mounting and installing the control unit, including safety precautions.
Procedures for connecting both 400V and 230V mains cables to the control unit.
Instructions for installing the control unit in conjunction with the redundant flap option.
Guidance on connecting wastewater pumps, including motor protection switch adjustment and wiring.
Details on PCB connections for wastewater pumps, including phase and temperature monitoring.
Information on connecting various level detection methods to the control unit.
Instructions for connecting a pressure sensor to detect filling levels.
General description of float switch operation for level detection.
Wiring instructions for connecting a mono float switch to the control unit.
Wiring instructions for connecting a duo float switch to the control unit.
General process for connecting different types of level sensors.
Instructions for connecting non-ATEX mono/duo level sensors.
Instructions for connecting ATEX-compliant mono/duo level sensors.
Details on connecting optical probes for motor-driven flap functions.
Information on routing the USB connection for external access to the PCB.
Instructions for installing the optional KESSEL TeleControl modem.
Overview of additional connection options for the control unit.
Details on connecting an external signal generator or alarm.
Information on connecting potential-free contacts, such as warning lights.
Procedure for establishing mains voltage for 400V and 230V control units.
Instructions on how to switch the control unit on and off after initial operation.
Detailed steps for carrying out the initialisation process, including parameter settings.
Procedure for selecting and confirming the desired language for the control unit interface.
Instructions for setting the system's date and time.
Guidance on selecting the correct product type for system configuration.
Instructions for selecting the appropriate system variant.
Procedure for selecting the operating mode (S1 or S3).
How to enter the standard maintenance interval for the system.
Steps for performing a functional check of the system and its components.
Procedures for updating software and reading out system data via USB.
Instructions and safety precautions for replacing the control unit's batteries.
Detailed wiring diagram for 400V system connections.
Detailed wiring diagram for 400V ATEX system connections.
Detailed wiring diagram for 230V system connections.
Access to system information such as performance, sensor configuration, and errors.
Details on operational information, including running times and cycle counts.
Specific data on total running time, pump running times, and cycle counts.
Records of system events and operational history.
Option to select the type of control system used.
Information regarding upcoming and past maintenance dates.
Displays the date of the most recent maintenance.
Displays the date of the next scheduled maintenance.
Shows real-time measured values like power, voltage, level, and temperature.
Access to various system parameters for configuration and adjustment.
Sections detailing manual operation, automatic operation, and self-diagnosis.
Controls for manual operation of pumps, flaps, and alarms.
Configuration options for automatic pump and system operation.
Functions related to the SDS self-diagnosis system for pumps and flaps.
Status indicating whether maintenance is due.
Records the completion date of maintenance tasks.
Allows setting the intervals for manual or automatic maintenance.
Settings for managing remote control clearance duration.
Procedure for calibrating the pressure sensor.
General section for system settings and parameter configuration.
Detailed configuration of system parameters.
Options for saving and loading system configuration profiles.
Configuration for the system's date and time.
Options for configuring the overall system setup.
Selection menu for various product types like Pumpfix or Aqualift.
Selection menu for different system variants.
List of specific system variants and their configurations (e.g., F Compact, S inspection chamber).
Selection of power ratings and related pump models (e.g., KTP, SPF).
Configuration settings for various sensors like pressure, float, and level sensors.
Configuration options for system communication, station name, and PIN.
Options for selecting the user interface language.
Function to reset system parameters to default or factory settings.
Access to advanced settings and parameters for expert users.
Options for reading data, software updates, and parameter input.
To Next Page
