Kessel Staufix FKA User Manual

Schaltgerät
Staufix FKA
Einbau- und Betriebsanleitung
Schaltgerät
Staufix FKA
Einbau- und Betriebsanleitung
Schaltgerät
Staufix FKA
Einbau- und Betriebsanleitung
DE .......................................................................... 2
EN ........................................................................ 26
FR ........................................................................ 50
IT ........................................................................ 74
NL ........................................................................ 98
PL ...................................................................... 122
2020/11 016-003

Kessel Staufix FKA Specifications

General

Backflow preventer	Yes
Operating Voltage	230 V
Protection Class	IP 54
Material	Plastic
Approval	EN 13564
Connection	Socket
Nominal size	DN 50

Summary

1 Notes on this manual

2 Safety

2.1 General safety instructions

Provides essential safety guidelines, warnings, and notices for safe operation and maintenance.

2.2 Personnel - qualification

Details the necessary qualifications and regulations for personnel operating the system.

2.3 Intended use

Specifies the approved applications and prohibited uses of the control unit.

2.4 Product description

Provides a description of the control unit and its main components.

3 Technical data

4 Installation

4.1 Installing the control unit

Instructions for selecting the installation position and mounting the control unit.

4.2 Connect the battery

Step-by-step guide for correctly connecting the battery to the control unit.

4.3 Connect the plug to the underside of the control unit

Detailed instructions for connecting cables, including motor and mains power plugs.

4.4 Making a redundant connection (option)

Guidance on setting up an optional redundant connection for enhanced reliability.

4.5 Further connection possibilities

Explains additional connection options like USB, GSM modem, and potential-free contacts.

4.6 Connection diagram

Visual representation of all electrical connections and terminal assignments.

5 Commissioning

5.1 Acknowledge alarm

Procedure for acknowledging and silencing alarm signals displayed by the control unit.

5.2 To put into service, proceed as follows

Steps required to bring the control unit into operational status after installation.

5.3 Carrying out initialisation

Details the initial setup parameters: language, date/time, product type, and maintenance interval.

5.4 Overview of configuration menu

Explains the structure and main areas of the control unit's configuration menu.

6 Troubleshooting

6.1 Troubleshooting

Lists common errors, their causes, and recommended remedial measures for quick problem resolution.