To Next PageTo Next Page
Need help?Do you have a question about the Kessel Aqualift Mono and is the answer not in the manual?
General| Product name | Aqualift Mono |
|---|---|
| Category | Control Unit |
| Type of wastewater | Grey water |
| Number of inlets | 1 |
| Inlet nominal size | DN 100 |
| Ventilation connection | DN 70 |
| Operating voltage | 230 V |
| Mains frequency | 50 Hz |
| Protection class | IP 68 |
| Delivery temperature | 35 °C |
| Nominal pressure pipe diameter | DN 32 |
| Pump type | Submersible |
| Material | Polyethylene |
| Operating Temperature | 5 °C - 35 °C |
General safety instructions and warnings for electrical components and installation.
Requirements for personnel operating the system and their approved activities.
Guidance on optimal placement of outdoor control cabinets considering ambient conditions.
Steps for mounting the control unit on the wall or surface.
Detailed guide on how to connect pump cables to the control unit.
Instructions for connecting standard pressure and optical probes.
How to connect non-standard sensors and external connections.
Steps for powering up the control unit and initial checks.
Procedure for setting language, date, time, and product type.
How to silence audible alarms and acknowledge display messages.
Navigation structure and main menu areas of the control unit.
Procedure for entering the scheduled maintenance date.
Information on the automatic system check and error reporting.
Instructions for calibrating the pressure sensor for accurate level readings.
Guide to identifying and resolving common error messages and issues.
