To Next PageTo Next Page
Need help?Do you have a question about the Kessel Staufix FKA Standard and is the answer not in the manual?
General| Brand | Kessel |
|---|---|
| Model | Staufix FKA Standard |
| Category | Control Unit |
| Language | English |
During installation, operation, and maintenance, follow all applicable safety measures, DIN and VDE norms, and electrical safety precautions.
Details the KESSEL Staufix® SWA backwater valve's design and function for wastewater drainage pipes with or without raw sewage.
Lists the components included in the Staufix® FKA delivery, including the body, cover, electrical package, and manual.
Provides guidance on installing the system body during construction and storing electrical components safely before commissioning.
Explains DIN EN 12056 requirements for connecting drainage fixtures and proper valve placement for service access.
Details the process for installing the Staufix® FKA body horizontally in concrete slab installations, including conduit routing.
Instructions for installing tiles or natural stone into the recessed cover to match flooring surfaces.
Guidance for installing the Staufix® SWA in areas with high groundwater or earth moisture using extension sections.
Instructions for installing the Staufix® for exposed pipe applications, including handling the protective cover.
Details using sealing gasket sets for concrete slab installations in areas protected against groundwater or earth moisture.
Outlines the monthly inspection procedure for the backwater valve, including checking the manual closure lever.
Details the bi-annual maintenance tasks, including cleaning, inspecting gaskets, checking flap movement, and performing tests.
Instructions for correctly assembling the upper and lower covers of the backwater valve, ensuring proper closure lever function.
Describes the procedure for performing a function and sealing test on the backwater valve as per DIN EN 13564 standards.
Instructions for cleaning and checking the optical sensor and probe to ensure proper functioning and indicator light behavior.
Explains the function of the emergency closure lever for manually locking the backwater flap, especially before vacation.
Outlines KESSEL's warranty options for defective products, including repair or replacement, and notification procedures.
Specifies that normal wear and tear, improper installation, handling, or maintenance are not considered defects.
Lists replacement parts and their article numbers for Staufix® FKA models used in exposed pipe installations.
Lists replacement parts and their article numbers for Staufix® FKA models installed in concrete slabs.
