KETRON sd4 - Voice Management and Preset Operations; Adjusting Voice Parameters; Recalling and Understanding Presets; Changing Individual Preset Sounds

31

Foreachofthevoicesoftheinstrument,,notonlycanyoudefinethe
sound,butyoucanalsodefinetheoctave,thevolumeandenableordisablethemute
function.Theprocedurethatfollowsexplainshowtochangetheparametersofavoice.
 Pressthekeyrelatedtothevoicetobechanged.TheLEDblinksto
pointoutthatthepartisinstatusandcanbechanged.
 Tochangea,simplyenterthenumberoftheonthenumericalkeypad0-9
orscrollusingthekeys.
 Tochangethe,holdthekeyofthevoicedownandpress
theorkeys.Whenchangingtheoctave,thedisplaywillshowtheletter‘o’
followedbyanumericalvalue,whichindicatesthealterationvaluemade(Range-2,+2).
 Theofthecurrentvoicecanbechangedonthepotentiometer2(Voice)onthe
instrumentpanel.Eachtimethepotentiometerismoved,thedisplaywillshowthevalue
ofthevolumeofthevoiceselectedforafewseconds.
 Toactivatethefunction,simplydisablethevoicebypressingthecorrespondingkey
.
THE PRESETS
The128oftheinstrumentaresplit-upasfollows:
 From1to64,Presetsthatcanbeeditedbutnotoverwritten.
 From65to128,Presetsthatcanbeeditedandoverwritten.
Youcanchangeoneofthefirst64Presets,butwhenyousaveit,itmustbesavedinalocation
from65 to128.Thesound canbe pulled-upfromthepanel usingthenumerical
keypad0–9orbyscrollingwiththekeys.Youcanobviouslypull-upthesound
viaaMidiprogramchange.Youcanchangethetimbreofeachvoicebyselectingit
fromoneofthe128available.

Proceedasfollowstoassignasoundtooneofthethreevoices:
o Selectthevoicewhereyouwishtoloadthebypressingoneofthe
keys.
o Enterthenumberoftheonthenumericalkeypadorscrollwiththe
keys.

Asalreadymentioned,eachsoundmaycompriseamaximumof3differentsounds.
Tochangeorcreateanew,followtheprocedurebelow:
  Selectthetobechangedusingthenumericalkeypad0-9orthekeys.
 Pressthe“”buttontoaccesstherelatedmode.Thedisplaywillshowsomedashes“--
-”andtheLEDswillblinktopointoutthatyouneedtoselectwhich
soundoftheyouwishtochange.
 SelectoneofthethreesoundsmakingupthePresetbypressingoneofthe
keys.:inthismode,thekeysdonothavetheir