24
EN
If necessary, users may select a BASIC MENU which allows modi-
BASIC
MENU proceed as described below.
display state, the starting point for accessing the BASIC MENU,
press the MENU key twice
UP
UP
SBS
SBS
DOWN
DOWN
MENU
MENU
Exampling of modifying a BASIC MENU parameter
UP
UP
UP
UP
UP UP
UP
DOWN
DOWN
DOWN
DOWN
DOWN DOWN
DOWN
MENU
MENU
MENU
MENU
MENU MENU
MENU
After accessing the BASIC
MENU, press the + and – keys
to scroll through the functions.
Press the MENU key quickly to
quit the menu.
Press the MENU key for 1 se-
cond to access the basic menu.
Press the + and – keys to scroll
through the functions to modify
other parameters.
Press the + and – keys to to
modify the value.
Press the MENU key for 1 se-
cond to display the parameter
value, or MENU quickly to quit
the function without saving.
-
tion function, press the MENU
key for 1 second, until the va-
1. Exit the programming menus by pressing MENU.
2. Press and hold “DOWN” until the text “CS.r.
4. Press MENU until the number “0” appears and to the left a dot that moves up and down continuously.
5. Press the button of the transmitter to be deleted.
6. If the procedure is completed correctly, the text “don” is displayed.
1. Exit the programming menus by pressing MENU.
2. Press and hold “DOWN” until the text “CS.r.
CA.r.
7. Press and hold MENU.
8. If the procedure is completed correctly, the text “don” is displayed.
N.B. During deletion, if the dot alongside does not move, this means that the receiver is receiving unmemorised codes.
To Next Page
Loading...
Need help?
General
