Key Automation HALO 900HA10 User Manual

Garage door opener
Motoriduttore per porte da garage
Motoréducteur pour portes de garage
Motorreductor para puertas de garaje
Garagentorantrieb
Motorredutor para portões de garagem
Motoreduktor do bram garażowych
HALO
Istruzioni ed avvertenze per l’installazione e l’uso
Instructions and warnings for installation and use
Instrucciones y advertencias para su instalación y uso
Anleitungen und Hinweise zu Installation und Einsatz
Instruções e advertências para a instalação e utilização
Instructions et avertissements pour l’installation et l’usage
IMAGES P. 45
IMMAGINI PAG. 45
IMAGES PAGE 45
IMÁGENES PÁG. 45
ABBILDUNGEN S. 45
IMAGENS PÁG.45
ILUSTRACJE STR. 45

Key Automation HALO 900HA10 Specifications

General

Brand	Key Automation
Model	HALO 900HA10
Category	Garage Door Opener
Language	English

Summary

Safety Warnings

Original Instructions and Safety

Emphasizes following original safety instructions for safe installation.

Personnel Qualification

Specifies that installation, testing, and maintenance require qualified personnel.

Pre-Installation Checks and Assessments

Installation Safety Precautions

Outlines measures against modifications, water, heat, and ensures proper power supply.

Maintenance Safety Precautions

Electrical System Requirements

Obstacle Detection and Manual Release Actuator

Periodic Installation Inspection

Regularly check for imbalance, wear, or damage to components.

Preliminary Checks

Door Suitability and Mechanical Checks

Electrical System and Safety Device Checks

Product Installation

4.1 Halo Assembly and LED Rail Installation

Step-by-step guide for assembling the Halo unit and LED rail.

4.10 Electrical Wiring

Detailed instructions for making electrical connections to the control unit.

4.11 Remote Control Programming

Step-by-step guide to programming remote controls.

4.12 Learning Opening and Closing Values

Procedure for teaching the system the door's open and close limits.

4.13 Changing a Control Unit Parameter

4.14 Control Unit Resetting

4.16 Using the Display Programmer

How to use the display programmer for system configuration and language selection.

4.17 KUBE PRO / KUBE Wireless Module Connection

Guide for connecting the KUBE PRO/KUBE wireless module.

Testing and Commissioning the Automation System

5.1 Testing Procedures

Procedures for testing all system components and their correct function.

5.2 Commissioning Procedures

Steps for putting the automation system into service after successful testing.