To Next PageTo Next Page
Need help?Do you have a question about the Key Automation SC52 and is the answer not in the manual?
General| Operating temperature | -20°C to +60°C |
|---|---|
| Voltage | 230V |
| Power supply | 230V AC |
| Frequency | 50 Hz |
| Power Consumption | 500W |
Important safety instructions for installation and use, compliance with standards.
Mandatory checks before installation and performing a risk assessment.
Precautions regarding water, heat, naked lights, and maintenance procedures.
Guidelines for child supervision, product disposal, and avoiding hazards.
Overview of the irreversible electromechanical gearmotor for sliding gates.
Illustration of standard installation components and their characteristics.
Procedure for manually disengaging the gearmotor using a key.
Methods for fixing the base-plate to the ground or concrete.
Steps for securely mounting the gearmotor onto the base-plate.
Instructions for attaching the rack element to the gate.
How to install limit switch brackets to prevent gate derailment.
Verification of system components, safety, and operational functionality.
Final steps including documentation, user instruction, and safety warnings.
Guidance on first-time operation, keeping the manual, and avoiding misuse.
Advice on child safety, handling malfunctions, and manual release procedures.
Information on periodic maintenance, modifications, and product disposal.
Troubleshooting remote control issues and proper battery disposal guidelines.
