Keyestudio 4WD - Page 95

95
www.keyestudio.com
The route to get test code（How to load?）
File Type
Path
File Name
Hex file
KS4031(4032) folder/Makecode
Tutorial/Makecode Code/Project
Code/Project 3： LED Dot
Matrix-2
Project 3： LED Dot
Matrix-2
Or you could edit code step by step in the editing area.
A. Enter“Basic”→“show number 0”block,
Duplicate it for 4 times, then separately set to“show number 1”,“show
number 2”,“show number 3”,“show number 4”,“show number 5”.
*****************************************************************