Keysight Technologies 34970A - Page 42

2 Quick Start
42 Keysight 34970A/34972A Service Guide
Verify that the correct line voltage is selected and the power-line fuse is good.
3 Rotate the line-voltage selector until the
correct voltage appears in the window.
1 Remove the power cord. Remove the
fuse-holder assembly from the rear panel.
100, 120 (127), 220 (230), or 240 VAC
2 Remove the line voltage selector from the
assembly.
4 Replace the fuse-holder assembly in the rear
panel.
Fuse: 500 mAT (for all line voltages)
Keysight Part Number: 2110-0458