1 Performance Tests
32 Keysight 53210A/53220A/53230A Assembly Level Service Guide
The Instrument Setup menu softkeys are displayed:
3 Press the Self Test softkey. The display shows:
– “Performing Self-Test. Please wait...” (displayed for several seconds.)
– If the self-test passes, “Sel f-Test Passed.” is momentarily displayed.
4 Mark Pass or Fail in the “Keysight 53210A/53220A/53230A Performance Test
Record (Tests 1 to 7)” on page 90.
If “Self-Test Failed” is displayed or any other failure is indicated, refer to the
troubleshooting section in Chapter 2, "Service" on page 99.
To Next Page
Loading...