164 Keysight FieldFox Handheld Analyzers Service Guide
Repair and Replacement Procedures
Final Assembly Procedure
7-
Final Assembly Procedure
1. If the RF Top Panel was removed, reinstall it. Refer to “Removing and
replacing the RF Top Panel Assembly” on page 138
2. Reinstall the measurement group assemblies into the front case. Refer to
“Reinstalling All Measurement Group Assemblies as One Unit” on page
162.
3. Combine the front and rear cases. Refer to “Combining the Front and Rear
Cases” on page 126.
To Next Page
Loading...
