36 Keysight FieldFox Handheld Analyzers Service Guide
Tests and Adjustments
Performance Tests (Keysight N7841A Software Package)
3-
Performance Tests (Keysight N7841A Software Package)
The performance tests section of the Keysight N7841A software package
verifies the electrical performance of your FieldFox analyzer. The software
automatically configures your analyzer to execute the performance tests.
The N7841A software package is not included with the analyzer; it must be
ordered separately. It can be downloaded from the Internet and a license
purchased on-line, or it can be ordered on a CD-ROM. Go to
www.keysight.com/find/calibrationsoftware for further information.
There are seventeen performance verification tests that test for the general
functionality of the analyzer and the SA (spectrum analyzer) specific
functionality.
Total test time may be up to 3 hours depending upon model and options
installed.
Details for these tests and recommended troubleshooting information can be
found in the N7841A help file.
To Next Page
Loading...
