1
Tests, Adjustments, and Troubleshooting
Information in This Chapter
Keysight M937xA PXIe Service Guide
2 Tests, Adjustments, and Troubleshooting
Information in This Chapter
This chapter contains procedures to help you check, verify, adjust, and
troubleshoot your network analyzer.
- The checks verify the operation of the assemblies in your network analyzer.
- The verification compares the operation of your analyzer to a gold standard.
- The adjustments allow you to tune your network analyzer for best
performance.
- The troubleshooting assists you in finding the cause of a failure.
Chapter 2 at-a-Glance
Section Title Summary of Content
Before You Begin Items to consider or procedures to perform before testing is begun:
-Get the Required Service Test Equipment.
-Verify the Operating Environment.
-Protect Against Electrostatic Discharge.
-Allow the Analyzer to Warm Up.
-Review the Principles of Connector Care.
About System Verification and
Performance Tests
Descriptions of:
-System Specifications
-Instrument Specifications
-System Verification Procedure
-Performance Tests
-Certificate of Calibration
ANSI/NCSL Z540.3-2006 and ISO/IEC
17025 Verification
The ANSI/NCSL Z540.3-206 and ISO/IEC 17025 process of verifying
your network analyzer.
To Next Page
Loading...
Need help?
General
