xvii
Documentation Overview
Getting Started Guide
— Safety Information
— Receiving the Instrument
— Environmental & Electrical Requirements
—Basic Setup
— Accessories
— Operation Verification
— Regulatory Information
User’s Guide
— Models, Options, and Front/Rear Panels for All Models
— Setting Preferences & Enabling Options for All Models
— Modes of Operation for All Models
— Front Panel Operation for All Models
— Optimizing Performance for All Models
— Using Pulse Modulation for All Models
with Options UNU, UNW, 320
— Basic Digital Operation, N5172B/82B—No BBG Option
— Basic Digital Operation, N5172B/82B
with Options 653/655/656/657
— Using Custom Digital Modulation for N5172B/82B
with Option 431 and 653/655/656/657
— Using Multitone and Two-Tone Waveforms for N5172B/82B
with Option 430
— Adding Real–Time Noise to a Signal for N5172B/82B
with Option 403 and 653/655/656/657
— Using Real–Time Phase Noise Impairments for N5172B/82B
with Option 432 and 653/655/656/657
— Using Avionics VOR/ILS Softkeys
for N5171B/72B and N5181B/82B with Option 302
— Using Baseband Operating Mode for N5172B/82B
(Primary, BERT, or N5102A)
— Using BERT for N5172B/82B
with Option UN7
— Using the N5102A Digital Signal Interface Module for
N5172B/82B with Option 003/004 and 653/655/656/657
— Troubleshooting
— Working in a Secure Environment
Programming Guide
— Getting Started with Remote Operation
— Using IO Interfaces
— Programming Examples
— Programming the Status Register System
— Creating and Downloading Files
— Creating and Downloading User–Data Files
To Next Page
Loading...
Need help?
General
