xviii
SCPI Reference
— SCPI Basics for “All Models”
— Basic Function Commands for “All Models”
— System Commands for “All Models”
— Analog Modulation Commands for “All Models”
w/ Option UNT, UNU, UNW, 320
— Avionics VOR/ILS Commands for N5171B/72B
and N5181B/82B w/ Option 302
— Arb Commands for N5172B/82B w/ Option 403, 431, 432
— Real-Time Commands for N5172B/82B w/ Option 403, 431, 432
— BERT Commands for N5172B/82B w/ Option UN7
— N5102A Digital Signal Interface Module Commands
for N5172B/82B w/ Option 003 or 004 or both
Programming
Compatibility Guide
— Provides a listing of SCPI commands and programming codes for
signal generator models that are supported by the Keysight EXG
and MXG X- Series signal generators.
Service Guide
— Troubleshooting
— Replaceable Parts
— Assembly Replacement
— Post–Repair Procedures
— Safety and Regulatory Information
— Instrument History
Key Help
a
— Key function description
— Related SCPI commands
a. Press the Help key, and then the key for which you wish help.
To Next Page
Loading...
Need help?
General
