Installation Note N9040-90014 3
Option RTS, Streaming
Option RTS, Streaming
Introduction
This installation note explains how to install Option RTS, rear panel Streaming output on
instruments that already have the following options installed:
— Option B2X or B5X (255 MHz or 510 MHz Analysis BW)
— Option RT2 or RT1, Real Time Signal Analyzer.
The option is licensed for one instrument model number/serial number combination. The license
file that is downloaded from the web will only install on the designated instrument.
Products Affected UXA N9040B
Serial Numbers: All
To Be Performed By: (X) Keysight Service Center
( ) Personnel Qualified by Keysight
( ) Customer
Estimated Installation Time:
Estimated Adjustment and Verification Time:
Additional Tasks:
2.0 Hours
0.0 Hours
0.0 Hours
This upgrade requires instrument software version A.17.04 or later
To verify the current version, press
System, Show System and look for the "Instrument
S/W Revision".
The latest revision of the X-Series software may be downloaded from:
http://www.keysight.com/find/xseries_software.
To Next Page
Loading...
Need help?
General
