Keysight 34465A - System Subsystem - I;O Configuration

SYSTem Subsystem - I/O Configuration
The SYSTem subsystem includes general instrument configuration commands, I/O locking commands,
license management commands, and remote interface configuration commands (listed below).
Command Summary
SYSTem:COMMunicate:ENABle
SYSTem:COMMunicate:GPIB:ADDRess
SYSTem:COMMunicate:LAN:CONTrol?
SYSTem:COMMunicate:LAN:DHCP
SYSTem:COMMunicate:LAN:DNS[{1|2}]
SYSTem:COMMunicate:LAN:DOMain?
SYSTem:COMMunicate:LAN:GATeway
SYSTem:COMMunicate:LAN:HOSTname
SYSTem:COMMunicate:LAN:IPADdress
SYSTem:COMMunicate:LAN:MAC?
SYSTem:COMMunicate:LAN:SMASk
SYSTem:COMMunicate:LAN:TELNet:PROMpt
SYSTem:COMMunicate:LAN:TELNet:WMESsage
SYSTem:COMMunicate:LAN:UPDate
SYSTem:COMMunicate:LAN:WINS[{1|2}]
SYSTem:USB:HOST:ENABle
Keysight Truevolt Series Operating and Service Guide
405
SCPI Programming Reference