Need help?Do you have a question about the Keysight 34970A and is the answer not in the manual?
General| Maximum Voltage | 300 V |
|---|---|
| Maximum Current | 1 A |
| Relay Type | Electromechanical |
| Type | Data Acquisition/Switch Unit |
| Slots | 3 |
| Connectivity | GPIB, RS-232 |
| DC Voltage Range | 100 mV to 300 V |
| AC Voltage Range | 100 mV to 300 V |
| Resistance Range | 100 Ω to 100 MΩ |
| Switch Type | Multiplexer, Matrix, General Purpose |
| Voltage Measurement Range | 100 mV to 300 V |
| Temperature Measurement | Thermocouple, RTD, Thermistor |
| Switching Speed | 60 channels/sec |
| DC Current Range | 1 mA to 1 A |
| AC Current Range | 1 mA to 1 A |
| Frequency Range | 3 Hz to 300 kHz |
| Scan Rate | Up to 250 channels/sec |
| Current Measurement Range | 1 µA to 1 A |
| Resistance Measurement Range | 100 mΩ to 100 MΩ |
Discusses accuracy, resolution, and low reading noise for reliable data acquisition.
Covers measurement of various signals without external hardware, simplifying setup.
Details interface options like GPIB, RS-232, LAN, and USB for PC connection.
Describes the 34972A's web interface for remote monitoring and control via a browser.
Describes its use as a low-cost data logger for characterization applications.
Positions it as a system for automated test with measurement capabilities.
Notes its use as a signal routing solution without the internal DMM.
Details applications and ease of use for monitoring and characterization.
Highlights resolution and accuracy for superior measurements.
Explains using the software for simplified data gathering and analysis.
Lists the 11 input signals the unit can measure and convert.
Covers data storage in non-volatile memory and USB flash drive use.
Emphasizes its role in automated test with modularity and flexibility.
Details the 6½ digit DMM's accuracy, resolution, and noise rejection.
Covers the DMM's 11 input types and per-channel configurability.
Explains advantages of integrated signal conditioning over external modules.
Explains the system for predicting relay end-of-life by counting switch closures.
Details offset voltage, isolation, bandwidth, SWR, crosstalk, and risetime.
To Next Page
