3 53220A/53230A Measurements
102 Keysight 53220A/53230A User’s Guide
Time Interval Measurements
The 53220A/53230A time interval measurements covered in this section include
one and two channel time interval, rise/fall time, pulse width, duty cycle, phase,
and single period.
Time interval
The SCPI commands listed in these examples are provided as an introduction to
how time interval measurements are made. Commands may be included even
though they specify default values - but which should be considered when
modifying the examples for actual use. Refer to the ‘Programmer’s Reference’ on
the Keysight 53210A/53220A/53230A Product Reference CD for additional
information.
For further information on time interval measurements, see Application Note
200-3 “Fundamentals of Time Interval Measurements” also included on the CD.
To Next Page
Loading...
