2 53220A/53230A Software Installation and Interface Configuration
70 Keysight 53220A/53230A User’s Guide
SCPI language emulation mode
If the 53220A/53230A is sometimes used in 53132A SCPI language (emulation)
mode, the instrument must be returned to its original (53220A/53230A) mode
before the firmware can be updated.
Downloading and installing the update utility
53220A/53230A firmware updates are installed in the instrument using the
Keysight update utility. The utility and firmware update can be found at:
www.keysight.com/find/53220A
www.keysight.com/find/53230A
Once this page is displayed, select the ‘Technical Support’ tab and then select
‘Drivers and Software’. Click on ‘532x0A Firmware Update’ and under ‘Documents
& Downloads’ select the utility:
53210A/53220A/53230A Firmware Update Utility
When prompted, select ‘Run’ to install the utility. The default installation directory
is C:\Program Files\Keysight\Firmware Update Utility Type 2. The utility will also
be added to the ‘start’ menu under “Keysight”.
To Next Page
Loading...
