Instrument Status 8
Keysight 53220A/53230A User’s Guide 283
Service Request Enable Register
The Service Request Enable register specifies which (status group) summary bit(s)
will send a service request message to the computer.
The bits are specified with the command:
*SRE <enable>
*SRE? (query form)
– enable: decimal value corresponding to the binary-weighted sum of the bits
in the register. For example, to enable the bit representing the Questionable
Data Register Group: *SRE 8.
Chapter 7 and Product Reference CD (p/n 53220-13601) contain examples using
the STATus subsystem.
To Next Page
Loading...
